If you are looking to mount a FLIR camera to your Inspire then this could be the ideal mounting set. Allows attachment of camera with GoPro mount style attachment, vTx and battery.
Warning: Last items in stock!
Are you looking to add FLIR capability to your Inspire without the extortionate cost of the Zenmuse XT?
This set includes a mounting bracket that attaches around the rear battery cage and an anti-vibration plate attached using 4 x vibration dampers (plus wire security loop). Providing the camera uses a standard GoPro mount style attachment then this set allows attachment of the camera plus required vTx and battery attached to the side plates using the provided velcro straps. Included in the set is the following
With this set you are good to go to start using a camera such as the FLIRvue and FLIRvue Pro.
In addition, the bracket also allows for the attachment of optional accessories, including a Level Plate and 3/8" fixing plate inc D-Ring screw attachment.
Level Plate: As an additional option you can also choose to add a Level Plate to the set. The level Plate includes a 2 axis bubble level to enable you to check for level ground to carry out IMU calibrations in the field. The bubble levels supplied are of the highest quality. However, these type of levels cannot be relied upon to be 100% accurate but do give a great indication of the surface level and certainly better than using nothing or the naked eye. Please note actual bubble level style may differ from picture shown due to availability but will always be a multi-axis (minimum 2) level bubble to enable 'in the field' calibration.
3/8" Screw Mount Plate: This plate comprises a 3/8" standard tripod style mount hole plus Quick Release D-Ring captive screw fixing, This allows you to add a plethora of items to the craft, such as the Theta 360 camera, which affix via an industry standard 3/8" tripod style mount. This optional plate includes the quick release captive D-Ring fixing screw so you are ready to go.